makaut-cs-301-analog and digital electronics

0

Asked: April 12, 2021In: MAKAUT

11. Write short notes on any three of the following :

0

a) Content Addressed Memory b) Tri-state gates in TTL family c) BCD-to-7 segment decoder/driver d) Data lock-out in a counter.

0

Sayani saha

Asked: April 12, 2021In: MAKAUT

10.b) Perform the conversation from d flip-flop to JK flip-flop.

0

0

Sayani saha

Asked: April 12, 2021In: MAKAUT

10.a) Draw the circuit for a four-bit Johnson counter using D flip-flops and explain its operation. Draw the timing diagram for this 4-bit Johnson counter. How does this timing diagram differ from that of a Ring counter?

0

0

Sayani saha

Asked: April 12, 2021In: MAKAUT

9.b) Draw a neat diagram for a R-2R ladder type DAC. What is linearity error and offset error in a DAC?

0

0

Sayani saha

Asked: April 12, 2021In: MAKAUT

9.a) Describe the operation of successive approximation type A to D converter. How many clock pulses are required in worst case for conversation for an 8-bit SAR? Define quantizing error for an ADC.

0

0

Sayani saha

Asked: April 12, 2021In: MAKAUT

8.b) Design a 4-bit Up/Down asynchronous counter using all JK flip-flops and other necessary logic gates. Use one direction control input M. If M=0, the counter will count up and for M-1 the counter will count down.

0

0

Sayani saha

Asked: April 12, 2021In: MAKAUT

8.a) Write down the excitation table of JK and D flip-flops. Derive the excitation equations for these two flip-flops.

0

0

Sayani saha

Asked: April 12, 2021In: MAKAUT

7.c) Draw logic diagram of Master/Slave JK flip-flop. Why is it called so?

0

0

Sayani saha

Asked: April 12, 2021In: MAKAUT

7.b) Design combinational circuit using an 8*4 ROM that accepts a 3-bit number and generates an output binary number equal to the square of the input number.

0

0

Sayani saha

Asked: April 12, 2021In: MAKAUT

7.a) Distinguish between ROM, PLA and PLD’s as elements realising Boolean functions.

0

11. Write short notes on any three of the following :

10.b) Perform the conversation from d flip-flop to JK flip-flop.

10.a) Draw the circuit for a four-bit Johnson counter using D flip-flops and explain its operation. Draw the timing diagram for this 4-bit Johnson counter. How does this timing diagram differ from that of a Ring counter?

9.b) Draw a neat diagram for a R-2R ladder type DAC. What is linearity error and offset error in a DAC?

9.a) Describe the operation of successive approximation type A to D converter. How many clock pulses are required in worst case for conversation for an 8-bit SAR? Define quantizing error for an ADC.

8.b) Design a 4-bit Up/Down asynchronous counter using all JK flip-flops and other necessary logic gates. Use one direction control input M. If M=0, the counter will count up and for M-1 the counter will count down.

8.a) Write down the excitation table of JK and D flip-flops. Derive the excitation equations for these two flip-flops.

7.c) Draw logic diagram of Master/Slave JK flip-flop. Why is it called so?

7.b) Design combinational circuit using an 8*4 ROM that accepts a 3-bit number and generates an output binary number equal to the square of the input number.

7.a) Distinguish between ROM, PLA and PLD’s as elements realising Boolean functions.

Questions Categories

MAKAUT

NCERT 11th Maths

NCERT 10th Maths

NCERT 12th Maths

Advance Management of Data(AMD)

Python

Technology

R

Sign Up

Sign In

Forgot Password

eduhilfe Latest Questions

Questions Categories